Pinnacle Spas LUXURY DX 5000, Owner'S Manual

Page: 53 / 70

Page 51
For HELP, call 800.304.9684
Sanitation
Sanitation level is influenced by two factors:
1. Filter Cycle (filtration) time (see page 26, 29 or 36 depending on your
controls)
2. How much you use your hot tub each week
If your water chemistry and water clarity are all proper and your
sanitation level is still too low/high, you can adjust the sanitation intensity
up/down by adding more/less sanitizer a little at a time and testing the
water again after two days.
Surface
The acrylic surface of your hot tub should be cleaned with recommended
cleaners and thoroughly rinsed with warm (not cold) water before
refilling. (See also page 44.) Call our order line at 800.304.9684 to order
cleaners.

Warning: NEVER use paint solvents, acids,
acetone, benzene, lacquer thinner, tolulene, xylene,
or similar chemicals to clean your hot tub shell.
Water
Depending on usage, the water in your hot tub should be changed every
1-3 months. Upon each change of water it is a good practice to wipe
down the hot tub.