Pinnacle Spas LUXURY DX 5000, Owner'S Manual

Page: 33 / 70

Page 31
For HELP, call 800.304.9684
4. Press the Jets1 button a third time to turn off the two speed pump.
Note : This pump remains on if filtration or heat is needed.
5. Press the Light button to turn on the LED light. Verify that this light is on.
6. Press the Light button a second time to turn off this light.
7. If equipped, press the Jets 2 button. You should hear the second pump
turn on, see water circulating, and see the Jets 2 icon illuminated on
the panel.
Note: If the water does not move through second pump jets repeat
same procedure as for first pump.
8. Press the Jets 2 button again to turn off this pump.
Water Balancing for PN Models
Note: Your Pinnacle Plus (PN model) hot tub comes with a built-in SPA
FROG sanitizing system. Depending on the area you live in and the
local regulatory rules, your SPA FROG consists of some
combination of a mineral cartridge and a bromine cartridge
manufactured directly in the plumbing line of your hot tub. Here’s
how it works:
The SPA FROG In-Line System is made up of (A) a FROG cap that is
easily distinguishable among the fittings on the top of the spa, (B) a
cartridge holder that pulls out of the system, (C) a mineral cartridge
that controls bacteria in the water and (D) a bromine cartridge that
helps support the minerals while oxidizing contaminants like body
oils. The cartridges are adjustable to meet your specific spa water
care needs.
NOTE: See page 66 for a photo of what the Spa Frog In-Line
Sanitation System looks like installed in a PN spa.