Pinnacle Spas LUXURY DX 5000, Owner'S Manual

Page: 12 / 70

Page 10
For HELP, call 800.304.9684
WARNING: Disconnect the electrical power before servicing. Before
obtaining access to terminals, all supply circuits must be
disconnected.
Caution: Test the GFCI (or RCD) before each use.
Our hot tubs are certified by Intertek Testing, SNAa Ltd.
Ontario, Canada to CSA-C22.2 No. 218.1-M89 and
ANSI/UL 1563 standards.
Parts with extra low voltage not exceeding 12v must be inaccessible to a
person in the hot tub. Earthed appliances must be permanently
connected to fixed wiring. Parts incorporating electrical components,
except remote control devices, must be located or fixed so that they
cannot fall into the hot tub.
Means for disconnection must be used in fixed wiring in accordance with
wiring rules.
Important – To allow the 240V GFCI to function properly, connect the
white Neutral wire from the hot tub to the Neutral terminal on the GFCI
breaker, not the Neutral bus in the GFCI breaker box. An improperly
connected Neutral causes the GFCI breaker to trip.
Figure 3 – GFCI Wiring