Pinnacle Spas LUXURY DX 5000, Owner'S Manual

Page: 42 / 70

Page 40
For HELP, call 800.304.9684
1. Lock-down tab
2. Double-stitched seams
3. Marine-grade cover material
4. Edge overlap material
5. Grip
handle
6. Aluminum channel
7. Heat-sealed insulation
8. Chemical-resistant vapor
barrier
9. Polystyrene seam stoppers
10. Reinforced edges
11. Breathable underside
material
Use the lock-down tabs to prevent access to
the hot tub by children and to prevent the wind
from lifting the cover off.
Figure 24 -
Lockdown Tabs
Sitting, standing, and snow buildup on the cover will break the cover.
Dragging it over rough surfaces will scuff or tear the fabric. Always lift by
the handles or use the optional cover lift device.
W a t e r M a n a g e m e n t
Our chemical water purification system is a perfect match for your hot
tub.
If your water quality seems improper, increasing the time your hot tub
filters the water (see page 26, 29 or 36 depending on your controls) may
clear up your problem.
Below are some answers to common water chemistry questions.
pH
It is common to have pH fluctuations after adding chemicals to your
hot tub or after a party. Let your jets run and give your water time to
stabilize. 9 times out of 10, your pH will come back into the 7.4-8.2
range on its own.
Mildew
on cover
Mildew usually grows in the folds and seams of your cover and then
drips into your hot tub water causing cloudiness and/or odor. Clean
with our special non-foaming All Purpose Cleaner and then rinse
the inside of your cover with clean warm water.