Pinnacle Spas LUXURY DX 5000, Owner'S Manual

Page: 28 / 70

Page 26
For HELP, call 800.304.9684
T o p s i d e C o n t r o l
There are various styles of topside control panels used domestically and
internationally in the Pinnacle Spas series of hot tubs. Basic operations common
to all control panels are provided next.
Setting the Water Temperature
Use Warm/Cool [or Temp for the 4-button panel] to set the water temperature
you desire. The temperature setting displays for five seconds to confirm your new
selection. The set point icon indicates that the display shows the desired
temperature (not the actual water temperature). The default temperature setting
is 100ºF.
Setting the Filtration Cycles
To set the filtration cycle start time, reset the controller by power cycling (power
off). After the five minute priming, the filtration cycle starts 12 hours later. You
can also skip the priming period by pressing
Warm/Cool [or Temp for the 4-
button panel].
Filter duration is programmable for 2, 4, 6, 8 hours or for continuous filtration
(indicated by “FC”). The default filter time is 2 hours. To change the filter cycle
duration, press
Warm/Cool [or Temp for the 4-button panel], then Mode [ Jets ].
Press Warm/Cool [ Temp ] to adjust. Press Mode [ Jets ] to exit.
When Jets 1 [or Jets for the 4-button panel] LED is ON and the Heat LED is OFF,
the hot tub is in filtration mode.
Other operations are slightly different between each of the three control panels.
Step-by-step programming and a quick reference summary are provided next.
LX 8000, LX 9000 AND LX 11000 – (VL700S)
The topside control panel operates and programs your hot tub. Basic button
functions are described next.
Figure 19 – Topside Callouts for VL700S Controls