Pinnacle Spas LUXURY DX 5000, Owner'S Manual

Page: 27 / 70

Page 25
For HELP, call 800.304.9684
5. If the water is running smoothly through the lines, open the air
control valve to the jets and you should see an increase in jet
pressure. Check and adjust the water and airflow of every jet if
necessary.
Each jet in your hot tub can be adjusted for massage intensity and
directional flow. Turn the outer jet dial counterclockwise to increase
the water volume and clockwise to turn it off. Pivot the angle of a jet
to achieve an optimal massage.
An air mixture intensifies the level of your massage. Turn the air
control valve counterclockwise to increase the air mixture and
clockwise to turn it off.
To minimize heat loss, close the air control valve when your hot tub
is not in use.
6. Press the Jets (Jets 1) button a third time to turn off the pump.
Note : The pump remains on if filtration or heat is needed.
7. Press the Light button to turn on the light. Verify that the light is on.
8. Press the Light button a second time to turn off the light.
9. If equipped, press the Jets 2 button. You should hear the pump turn
on, see water circulating, and see the Jets2 light illuminate on the
panel.
10. Press the Jets 2 button again to turn off the pump.
11. If equipped, press the Blower button. You should hear the blower
turn on, see water bubbling, and see the blower light illuminate on
the panel.
12. Press the Blower button again to turn off the blower.
Water Balancing
Note: Perform water balancing weekly and whenever your water is
changed (or when your hot tub is first filled). Once your hot tub
reaches 95ºF, add the necessary chemicals to stabilize your water
chemistry (pH, hardness, and total alkalinity, etc.). Then add the
start-up chemicals
*
the water. Turn Pump 1 on high speed
immediately to distribute it evenly.
Test Range
Total Alkalinity 80-180 ppm
pH 7.2-7.8
Calcium
Hardness
150-400
ppm
Bromine 1.0-2.0 ppm
Table 4 - Recommended Ranges
for Balanced Water
Note: Test strips and
water balancing chemicals
are available by calling
800.749.8003 or visiting
www.hottubparts.com