Intex PureSpa SSP-H-20-1G Owner'S Manual Download | Manualshive

Page: 1 / 23

background image

295

NL

(295NL) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 07/04/2017

English

OWNER’S MANUAL

PureSpa™

SSP-H-20-1G

295-*NL-R0-1807

Do not forget to try these other fi ne Intex products: pools, pool
accessories, in-home toys, airbeds and boats available at fi ne
retailers or visit our website.

Due to a policy of continuous product improvement, Intex reserves
the right to change specifi cations and appearance, which may
result in updates to the instruction manual without notice.

For illustrative purposes only.

©2017 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.
- Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte
vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/
Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in
Lizenz von/

Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex

Recreation Corp., P.O. Box 1440, Long Beach, CA 90801

• Distributed in the European Union by/Distribué dans l’Union Européenne

par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/

Intex Trading B.V., Venneveld 9, 4705 RR

Roosendaal – The Netherlands
www.intexcorp.com

IMPORTANT

SAFETY RULES

Please read, understand, and follow all

instructions carefully before installing

and using this product. Keep for future

reference.

1
2
3
...
»

Summary of Contents for PureSpa SSP-H-20-1G
























Reviews:

No comments

Related manuals for PureSpa SSP-H-20-1G

Brand: SpaDealers Pages: 4

Brand: Coast Spas Pages: 15

Infinity Cascade II

Brand: Coast Spas Pages: 48

Brand: Sharper Image Pages: 2

Brand: Cal Spas Pages: 100

Brand: Jacuzzi Pages: 42

Brand: HoMedics Pages: 20

2003 Bullfrog Portable

Brand: JetPaks Pages: 40

Brand: Aquatic Pages: 1

Executive Series

Brand: ThermoSpas Pages: 76

Brand: Alps Spas Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands