PIAGGIO PORTER 1.3 16V 2008, Service Manual

Page: 764 / 892

Lower roller removal
1. Hold the sliding door with a jack, interposing a
wooden wedge as shown in the figure.
2 . Remove the lower roller arm by taking out the
two relevant bolts.
3 . Remove the guide roller pin and the lower roller
from the lower roller arm, using an Allen wrench.
Central hinge removal
1 . Hold the sliding door with a jack, interposing a
wooden wedge as shown in the figure.
N.B.
- CARRY OUT THIS OPERATION WITH ANOTHER PERSON
TO KEEP THE DOOR IN POSITION.
2 . Remove the side upholstery.
3 . Remove the central guide upholstery.
N.B.
- THE UPHOLSTERY IS HELD BACK BY TOOTHED HOOK.
THEN MOVE THE UPHOLSTERY IN THE DIRECTION INDI-
CATED BY THE ARROW AND, AFTERWARDS, REMOVE IT
FROM THE FRONT SECTION OUT OF THE VEHICLE.
Chassis
PORTER 1.3 16V
CH - 764