PIAGGIO PORTER 1.3 16V 2008, Service Manual

Page: 17 / 892

- In the case of guides or references which indicate
the fastening clamp position, make sure that it is
placed inside the guides. As regards fixing with
references, make sure that the clamp is fastened
with a maximum error of ± 10 mm.
C = Guide for clamp
D = The fastening clamp shall be inserted between two points.
- Terminals and connectors
E = Reference for fixing position F = Fixing shall be carried out with a tolerance of ± 10 mm with respect
to the reference.
4. Terminals and connectors
Connector connection:
- Connector with safety lock, make sure that the lock is properly inserted.
- Connector without lock, insert the connector until it stops at the end of the stroke.
Fixing with screws
- When the locking torque is specified, strictly fol-
low the specifications.
- Make sure that the protruding section is not on
the fixing surface.
- After fixing, pull the terminal gradually to make
sure that it is not loose.
- While carrying out other operations, make sure
not to accidentally disconnect connectors.
A = Correct B = Incorrect (terminal bent)
PORTER 1.3 16V
General guidelines
N GEN - 17