PIAGGIO PORTER 1.3 16V 2008, Service Manual

Page: 44 / 892

Suggested products chart
PRODOTTI CONSIGLIATI
Product Description Specifications
AGIP ROTRA MP 80W-90 Oil with specifications SAE 80W-90, API
GL-5
Gearbox oil
AGIP BRAKE FLUID DOT4 Brake fluid FMVSS DOT 4
AGIP GREASE PV 2 Multipurpose grease NLGI 2 specifications; ISO-LXBIB2
AGIP ARNICA 46 Oil for hydraulic tilting system pump Oil for hydraulic systems in compliance
with ISO VG 46, DIN 51524 HVLP
AGIP SUPERDIESEL MULTIGRADE
15W-40
Engine oil SAE 15W-40, API CF-4/SG
AGIP SINT EVOLUTION Olio motore (indicato per climi freddi) SAE 5W-40, API SL, ACEA A3
Engine assembly
N.B.
•
ADJUSTMENTS OR SERVICES DESCRIBED IN THIS SECTION ARE CARRIED OUT AS
A GENERAL RULE WHEN THE ENGINE IS HOT.
•
A "HOT ENGINE" MEANS THAT CONDITION IN WHICH THE COOLING FAN HAS BEEN
ACTIVATED AT LEAST ONCE.
•
CHECK THAT ALL THE ACCESSORY SWITCHES ARE SET TO OFF.
•
THE GEARSHIFT LEVER SHALL BE IN NEUTRAL.
•
PULL THE HANDBRAKE ALL THE WAY.
•
POSITION THE STEERING WHEEL SO THAT THE WHEELS ARE PERFECTLY
ALIGNED.
•
CHECK THAT THOSE PARTS REMOVED FOR ADJUSTMENTS OR CHECKS ARE RE-
FITTED.
Air filter
1. Remove the filtering element from the air filter
housing.
2. Visually inspect the filtering element and check
that it is not too dirty, damaged or oily. If necessa-
ry, replace the filtering element.
3. Blow compressed air over the entire lower sec-
tion A of the filtering element. Then, do the same
with the upper section B .
4. Refit the filtering element into the filter housing.
Close the housing.
Maintenance
PORTER 1.3 16V
MA - 44