PIAGGIO PORTER 1.3 16V 2008, Service Manual

Page: 554 / 892

55. Lock nut
56. Odometer control gear
57. Radial bearing (rear)
58. Bearing rear locking
59. Oil seal
60. Gasket
61. Filler cap
62. Bimetallic bushing
63. T oil seal
64. Dust guard
65. Housing subassembly
66. Plate locking the odometer sleeve
67. V oil seal
68. Gasket
69. Sleeve assembly of the rpm indicator shaft
70 . Gasket
71. Rpm indicator guide gear subassembly
72. T oil seal
73 . K Oil seal
74. Oil guide plate
34. Spring
Pay special attention to the fitting direction, which shall be the same to the 35 part.
35. Reverse gear limit cam
Pay special attention to the fitting direction (during the removal and fitting phases), so that the reverse
gear limit cam has the proper fitting direction.
36. Reverse gear limit shaft
D = 8 mm, L = 7.15 mm.
37. Subassembly of the selection lever
Pay special attention to the lever fitting direction when the components are fitted 41 and 42 .
*38. Pin
D = 6 mm, L = 22 mm
Fit this pin in its seat, inserting it from the side without the groove.
39. Gear control shaft cover
The gearbox cover is fitted with four bolts; three bolts M8 ( L = 28 mm) and the remaining bolt (olive-
green) always M8 ( L =19 mm). Component 40 is interposed between the cover and the gearbox.
*40. Gasket
(No asbestos).
Gear-box
PORTER 1.3 16V
GE - 554