Part I: PCM-049/phyCORE-OMAP44xx System on Module
phyCORE-OMAP44xx
74
©
PHYTEC Messtechnik GmbH
2012
L-760e_1
Additional specifications:
These specifications describe the standard configuration of the phyCORE-OMAP44xx as of the printing of this
manual.
Connectors on the phyCORE-OMAP44xx:
Manufacturer Samtec
Number of pins per contact Rows 120 (2 Rows of 60 pins each)
Samtec part number (lead free) BSH-060-01-L-D-A (receptacle)
Mating connectors on the phyCORE-OMAP44xx Carrier Board:
Mated height 5 mm
Manufacturer Samtec
Number of pins per contact Row 120 (2 Rows of 60 pins each)
Samtec part number (lead free) BTH-060-01-L-D-A (header)
PHYTEC part number (lead free) VM240
Different heights are offered for the receptacle sockets that correspond to the connectors populating the
underside of the phyCORE-OMAP44xx. The connector height given above indicates the distance between the two
connected PCBs when the module is mounted on the corresponding carrier board. In order to get the exact
spacing, the maximum component height (1.5 mm) on the bottom side of the phyCORE must be subtracted.
Please refer to the corresponding data sheets and mechanical specifications provided by Samtec
(
Dimensions:
51 mm x 41 mm
Weight:
approximately 16 g with all optional components mounted on the circuit
board
Storage temperature:
-40°C to +125°C
Operating temperature:
0°C to +70°C (commercial) -40°C to +85°C (industrial)
1
1.
In order to guarantee reliable functioning of the SOM up to the maximum temperature appropriate cooling measures must be
provided. Use of the SOM at high temperature has big impact on the SOM's life span (refer also to "
Important information on POH
(power-on hours)
" in the Preface for more information).
Humidity:
95 % r.F. not condensed
Operating voltage:
VCC 3.3 V
Power consumption:
VCC 3.3 V/1A typical
Typ. 3.3 watts
Conditions:
VCC = 3.3 V, VBAT = 0 V
,512MB LP-DDR-RAM, 512MB NAND Flash, Ethernet,
1 GHz CPU frequency at 20°C
