Safety – Setting up and commissioning – Operation – Spare parts lists
Basic safety instructions
2021-03-22
9
USE A BREATHING MASK IN CASE OF WORK THAT CAUSES DUST AND CHIPS!
ALWAYS USE HEARING PROTECTION!
Secure the workpiece.
Attention!
Before changing the units, the main switch must be switched to position
"0". Pay attention to the stoppage of the unit.
Pay attention to stable position so that you can keep your balance in any
working position.
Avoid unintentional switching on. Make sure that the main switch is switched off when
connecting to the mains power supply.
Be attentive at all times. Concentrate on your work. Take a sensible approach. Do not
use the machine if you are tired.
This machine may only be operated persons who are regarded as suitable for the
task by the plant manager or supervisor.
All persons who carry out work on the machine, must read the operating instructions
and confirm that they have understood the operating instructions by their signature.
When transporting individual components, at least two persons are required for parts
that are heavier than 25 kg (see technical data). (25 kg per person).
Switch off the machine and wait until the tool has reached idle position before leaving
the workplace. When not in use, before servicing, and when changing the tool,
additionally unplug the mains plug. Lock the main switch against unintentional
switching on.
Never touch the power units while the machine is running. Never lift power units by
their tools (saw blades or cutters); never reach under these tools. If you do need to
work on the power units (e.g., height adjustment of the sawing or milling cutting units)
turn off the machine at the main switch, and disconnect the machine from the mains
by unplugging the mains plug. During normal operations, only use the power unit
pneumatic lifting system to raise and lower the power units.
Never leave tool spanners in place. Before switching on, check whether the spanners
and adjusting tools have been removed.
Use the right tools. Intended use is described in this manual. With the right tools, you
will achieve optimum quality and ensure your personal safety.