Safety – Setting up and commissioning – Operation – Spare parts lists
Tool change
24
2021-03-22
19 Tool change
19.1 Milling cutter unit
Attention!
To change the units, the main switch must be turned to position "0" OFF.
Pull out the mains plug.
An unintentional start of the units is thus prevented.
•
Remove the power unit from the machine head.
19.2 Saw unit
Attention!
To change the units, the main switch must be turned to position "0" OFF.
Pull out the mains plug.
An unintentional start of the units is thus prevented.
•
Remove the sawing unit from the machine head.
•
Performing a tool change:
Fig. 17:01
Fig. 17:02
Fig. 17:03
Fig. 17:04
Fig. 17:05