Safety – Setting up and commissioning – Operation – Spare parts lists
Safety symbols in this manual
2021-03-22
7
3 Safety symbols in this manual
The safety symbols along with the text of the safety message are to draw attention to unavoidable residual
dangers involved in using the machine. These residual risks relate to persons, the machine, other objects,
and the environment.
The following safety symbols are used in the present operating instructions.
Danger!
This symbol indicates a danger exists, above all to the life and health
of persons – in addition, it can point to potential risks for the machine,
objects or the environment.
If these instructions are not followed, this can lead to serious and even fatal injuries.
WARNING!
This symbol indicates that risks exist, above all for the machine,
objects and the environment – risks for persons are not expected.
If these instructions are not observed, this can lead to malfunctions and damage
to the machine. Damage to property and environmental damage can also occur.
This symbol indicates that, above all, health risks exist.
These risks emanate from on sharp, cutting and rotating tools.
This symbol indicates that, above all, health risks exist.
These risks emanate from moving parts that can cause trapping or crushing.
This symbol indicates specific risks to the health and life of persons
due to electric voltages.
Information!
This symbol indicates instructions that contribute to a better understanding
of the machine – the information will help you use the machine in the best
possible way. This symbol does not point to safety information.
Please also note that a safety symbol can never replace the wording of a safety
instruction – the wording of a safety instruction must therefore always be
read completely.