Safety – Setting up and commissioning – Operation – Spare parts lists
Pneumatic power unit lifting system
2021-03-22
35
26 Pneumatic power unit lifting system
The automatic pneumatic lifting and lowering system makes it easy to lower the power units to the sheet to
be cut. This lifting system is essential for facilitating work, especially at the rear of the table and with heavy
power units. Removing the need for manual lifting and lowering of the power units boosts the machine’s
milling and cutting performance.
The pneumatic cylinder for
raising or lowering the power
units on the left side.
Sawing unit on the left side
of the machine head.
The button for raising or
lowering the power units
on the left side.
The pneumatic cylinder for
raising or lowering the power
units on the right side.
Milling cutter unit on the left
side of the machine head.
The button for raising or
lowering the power units
on the right side.
The buttons for lifting and lowering the power units are located on the control handles for the longitudinal
direction (X axis).
The button on the left control handle raises and lowers the units on the left side and the button on the right
control handle raises and lowers the units on the right side.
Pushing the button once raises or lowers the power unit, depending on where the unit was before pressing
the button.
Pressing the button once with the power unit lowered. – The power unit is raised.
Pressing the button once with the power unit raised. – The power unit is lowered.
26.1 The pneumatic power unit lifting system on the back
of the machine head.
The two pneumatic cylinders on the back
of the machine head.
Two slotted screws for adjusting the raising and lowering
speed. (The screws on the hose connections).