Safety – Setting up and commissioning – Operation – Spare parts lists
Tool change
26
2021-03-22
Changing the cutting tool (saw blade) is identical to the process for the longitudinal or cross-cut saw.
Assembly is in reverse order.
WARNING!
When fitting the saw blade note the direction indicator on the groove sawing unit and on
the blade .
19.5 Use a V groove saw blade (without modification as of models 07.2013)
Fig. 19:01
Fig. 19:02
Fig. 19:03
Fig. 19:04
Fig. 19:05
Fig. 19:06
Fig. 19:07
Fig. 19:08
Changing the cutting tool (V groove saw blade) is identical to the process for the longitudinal or cross-cut
saw.
But note the following:
Because the V groove saw blade can be up to 32 mm wide, the motor must be unscrewed from its mount
to fit the saw blade. To do this, loosen the 4 retaining screws (Fig. 19.02) on the motor mount, and pull
the motor out of the housing until the blade can be inserted into the protective housing.
First push the saw blade onto the saw blade holder.
Slide the saw blade holder with the saw blade onto the motor and fasten it again with the 4 retaining
screws.
Slide on spacer rings (Fig. 19.03) and secure with nuts.