Safety – Setting up and commissioning – Operation – Spare parts lists
Proper use of the machine
2021-03-22
17
12 Proper use of the machine
Danger!
Cutting of gypsum boards, gypsum fibre, cement fibre and hard plasterboard, fibreboard,
chipboard, soft fibreboards.
Production of moulded parts by means of V groove milling in all above mentioned materials.
WARNING!
Use only dry plates.
The processed materials must not contain metal parts (such as screws, nails, etc.).
Material may only be fed in with the machine switched off and after the machine
head has been pushed back.
13 Set-up location
The mobile sheet cutting table must be installed in a flat and dry location.
Make sure that sufficient space is available for the mobile sheet cutting table to allow
access from all sides.
The work area lighting must be set up as per national safety regulations.
Power supply cables and hoses must be routed so that they do not cause a stumbling
hazard at the workspace.
Also consider the machine travel range and ensure sufficient cable and hose lengths.