Safety – Setting up and commissioning – Operation – Spare parts lists
Basic safety instructions
10
2021-03-22
WARNING!
The use of tools other and accessories than those tools recommended in
this manual, or the performing work with this power tool beyond the intended use, can
lead to accidents.
Handle the cable carefully. Do not use the cable to pull the plug out of the socket.
Protect the cable against heat, oil and sharp edges.
Maintain your tools with care. Keep your tools sharp and clean to be able to work well
and safely. Follow the maintenance instructions and instructions for changing tools.
Check the plug and the cable regularly and call in PFT customer service to replace
them in case of damage. Check the extension cable regularly and replace it in the
event of damage. Always keep all switches dry, clean and free from oil and grease.
Check your mobile sheet cutting table incl. accessories for damage. Before use
check the power tools for correct and intended function. Check the moving parts for
damage. All parts must be correctly installed to ensure correct operation of the
machine. Damaged parts and safety devices must be correctly repaired or replaced.
Do not use the machine if the switches are defective. Damaged switches must be
replaced by PFT customer service.
Have the repairs carried out by PFT customer service only. This mobile sheet cutting
table complies with the relevant safety regulations. Repairs may be carried out by
PFT staff only to avoid a risk of accidents for the operator.
This machine is not designed for use in EX areas (areas with risk of explosive
atmosphere).
The operator of the machine is obliged to comply with the national rules and
regulations.
4.3 Observing the operating instructions
Keep these operating instructions near the machine. It must be ensured that all
persons who are to perform work on the machine are able to view the operating
instructions at any time. In addition to the operating instructions, operating
instructions for the purposes of the Occupational Safety Act and the Working Material
Use Regulations must be provided.
In addition, the operating instructions of the work equipment (milling cutter unit and
saw unit) must be observed. All deviating instructions for use (e.g., for tool changes)
are described in these operating instructions.
All safety information signs and operating instruction signs on the machine must
always be kept in a legible condition. Damaged or illegible signs must be replaced
immediately.