Safety – Setting up and commissioning – Operation – Spare parts lists
Extraction unit
18
2021-03-22
14 Extraction unit
The mobile sheet cutting table is equipped with a suction hose. This is designed for
extraction for both machine power units. There is no need to switch over between the
power units.
Ensure sufficient performance in your choice of an extraction unit. The air speed should
be 28 m/s, and the conveying capacity 72 m³/h.
Power is supplied to the extraction unit via the 230 V mains (not via the Boardmaster).
When operating the system make sure the device switch on the extraction unit is set to
“RA" automatic mode. There is no need to press the on/off switch separately, as the
extraction device is controlled by the cutting table. (The Boardmaster is powered via the
extraction system).
Always use an extraction unit for a safe and dust-free work!
NOTE!
After switching off the machine power unit, the extraction unit switches off after a delay
of a few seconds. This is normal operation and serves to clean the entire extraction duct.
NOTE!
Use of an extraction unit that is not recommended by us can lead to injuries and
damage to the system. In this case we are not liable for personal or material
damage.