Safety – Setting up and commissioning – Operation – Spare parts lists
Maintenance and care
2021-03-22
39
28 Maintenance and care
All maintenance and repair work must be performed only when the main switch is turned off and the mains
plug disconnected.
To increase the service life and precision, we recommend cleaning the stops and guide surfaces daily
to remove dust and dirt.
To maintain the output of the extraction system, it is essential to clean the extraction ducts, extraction tubes
and extraction housing daily, or several times a day if the work generates large amounts of dust.
Never clean the system with compressed air, but only with the help of brushes or a vacuum cleaner.
During operation, make sure that the channels for the drag chain and extraction hose upstream and
downstream of the machine head are kept free of dirt and objects, to ensure troublefree operation. Exposed
cables must always be checked for damage before use, and replaced if necessary.
In case of prolonged periods without use, or high levels of humidity, it is absolutely essential
to maintain the guide rails with a suitable rail oil (spray).
This keeps the machine in good condition.
It is recommended to have the machine inspected by qualified personnel every 6 months.
29 Warranty provisions
Unintended operation and maintenance as per these operating instructions, as well as intervention
and adjustments that were not agreed with us will void your guarantee and legal warranty.
The accuracy of the machine can only be ensured under the conditions of installation stated in this manual.
However, the guarantee does not apply to wear parts as well as bearings, brushes and carbon
brushes on the power units, or in case of unintended use and overloading of the power units.
Our hotline (+ 49 9323 31 18 18) is available for technical information.
Any transport, packaging and shipping costs incurred, as well as maintenance and adjustments not covered
by the warranty will be charged on time and materials basis.
Complaints and warranty claims can only be accepted and processed if you quote the machine number
as per the type plate.