Safety – Setting up and commissioning – Operation – Spare parts lists
Tool change
2021-03-22
25
19.3 Sawing unit sixfold
Attention!
To change the units, the main switch must be turned to position "0" OFF.
Pull out the mains plug.
An unintentional start of the units is thus prevented.
•
Remove the groove sawing unit from the machine head.
•
Performing a tool change:
Fig. 18:01
Fig. 18:02
Fig. 18:03
Fig. 18:04
Fig. 18:05
Fig. 18:06
19.4 Groove sawing unit sixfold
Fig 18.05A
Spacer ring (1) 2mm
Spacer ring (2) 1mm
Spacer ring (3) 4mm
Pay attention to staggered
positions of the saw blades!
1
1
2
3