VersiStart i III
46
3I – Stop Time-2
Range:
0:00 - 4:00 (minutes:seconds)
Default:
0 second
Description: Sets the stop time.
3J – Adaptive Start Profile-2
Options:
Early Acceleration
Constant Acceleration (default)
Late Acceleration
Description: Selects which profile the VersiStart i III will use for an Adaptive Control soft start.
3K – Adaptive Stop Profile-2
Options:
Early Deceleration
Constant Deceleration (default)
Late Deceleration
Description: Selects which profile the VersiStart i III will use for an Adaptive Control soft stop.
3L – Adaptive Control Gain-2
Range: 1%
-
200%
Default:
75%
Description: Adjusts the performance of Adaptive Control. This setting affects both starting and stopping control.
9.4.4
4 Protection Levels
4A – Current Imbalance
Range: 10%
-
50%
Default:
30%
Description: Sets the trip point for current imbalance protection.
4B – Phase Sequence
Options:
Any Sequence (default)
Positive Only
Negative Only
Description: Selects which phase sequences the soft starter will allow at a start. During its pre-start checks, the starter examines
the sequence of the phases at its input terminals and trips if the actual sequence does not match the selected option.
4C – Undercurrent
Range:
0% - 100%
Default:
20%
Description: Sets the trip point for undercurrent protection, as a percentage of motor full load current. Set to a level between the
motor's normal working range and the motor's magnetising (no load) current (typically 25% to 35% of full load current).
A setting of 0% disables undercurrent protection.
4D – Instantaneous Overcurrent
Range:
80% - 600% FLC
Default:
400%
Description: Sets the trip point for instantaneous overcurrent protection, as a percentage of motor full load current.
4E – Input A Trip
Options:
Always Active (default)
A trip can occur at any time when the soft starter is receiving power.
Operating Only
A trip can occur while the soft starter is running, stopping or starting.
Run Only
A trip can only occur while the soft starter is running.
Description: Selects when an input trip can occur.
