VersiStart i III
38
9.
Programming Menu
The Programming Menu lets you view and change programmable parameters that control how the VersiStart i III operates.
To open the Programming Menu, press the
MENU/ENTER
button while viewing the status or graph screens.
To navigate through the Programming Menu:
x
to scroll through parameter groups, press the
or
button.
x
to open a submenu, press the button.
x
to view the parameters in a group, press the button.
x
to return to the previous level, press the
EXIT
button.
x
to close the Programming Menu, press
EXIT
repeatedly.
To change a parameter value:
x
scroll to the appropriate parameter in the Programming Menu and press to enter edit mode.
x
to alter the parameter setting, use the
and
buttons. Pressing
or
once will increase or decrease the value
by one unit. If the button is held for longer than five seconds, the value will increase or decrease at a faster rate.
x
to save changes, press
STORE
. The setting shown on the display will be saved and the keypad will return to the
parameter list.
x
to cancel changes, press
EXIT
. The keypad will ask for confirmation, then return to the parameter list without saving
changes.
You can access the Programming Menu at any time, including while the soft starter is running. Any changes to the start profile take
effect immediately.
The Programming Menu contains four sub-menus:
Quick Setup Menu
Provides access to quick setup options for common applications.
Standard Menu
The Standard Menu provides access to commonly used parameters, allowing you to configure the
VersiStart i III to suit your application.
Extended Menu
The Extended Menu provides access to all the VersiStart i III's programmable parameters,
allowing experienced users to take advantage of advanced features.
Setup Tools
Setup Tools includes maintenance options to configure the VersiStart i III's date and time or load a
standard parameter set.
