manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 49

39

4:Performing an Activity

Once you set up the activity, you are ready to have the patient 
perform the activity.

Note

Be sure that you have the Core:Tx transceiver turned on 
and in the proper location. For more information, see 
“Positioning the Transceiver” on page 40. 

For information about working with the Activity panel, see the 
following topics:

•

“Starting the Activity” on page 39

•

“Understanding the Monitor Activity Screen” on page 44 or 
“Understanding the Challenge Activity Screen” on page 46

•

“Understanding the Audio Feedback” on page 48

•

“Calibrating the Range of Motion and Starting the Activity” on 
page 42

•

“Understanding the Score” on page 48

•

“Adjusting the Activity Settings” on page 49

•

“Recalibrating the Range of Motion” on page 49

Core:Tx stores the activity results in the Core:Tx database. For 
more information, see “Viewing Results” on page 51.

Starting the Activity

After you set up the activity the way you want it, you are ready to 
start the activity. For more information about setting up an activity, 
see “Chapter 3, Setting Up an Activity” on page 31.

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands