manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 59

 

4: Performing an Activity

49

Adjusting the Activity Settings

You can adjust any of the settings for an activity whenever you 
want to vary the activity. You may find that the settings are too 
difficult or too easy, or you may want to change to a different type 
of activity.

To adjust the activity settings:

•

Use  the 

arrow

 keys to select 

Activity Setup

 on the left side of 

the Activity panel or in the navigation bar and press 

space bar

.

•

For information about navigating in Core:Tx, see 
“Navigating in Core:Tx” on page 14.

•

The Activity Setup panel displays with all of the available 
setting buttons. For information about setting up an 
activity, see “Setting Up an Activity” on page 31.

Recalibrating the Range of 
Motion

You can recalibrate the range of motion if you adjust the 
transceiver’s location or you want to change the range of motion. If 
Core:Tx is not responding to motion or you find that you have to 
recalibrate repeatedly while performing an activity, see “Motion 
Does Not Display Properly on the Computer Screen” on page 55, 
specifically the solutions listed for “Core:Tx does not respond to 
motion.”

To recalibrate the range of motion:

•

Use  the 

arrow

 keys to select 

Calibrate

 on the left side of the 

Activity panel and press 

space bar

.

•

For information about navigating in Core:Tx, see 
“Navigating in Core:Tx” on page 14.

•

The Calibration panel displays. For information about 
calibrating the range of motion, see “Calibrating the Range 
of Motion and Starting the Activity” on page 42.

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands