manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 48

38

Core:Tx User Guide

 

Saving Activity Settings as the 
Default 

You can save the current activity settings as the default for the 
system when patient data is not open. This means that anytime you 
go to the Activity panel without patient data open, these are the 
settings you will see. This lets you quickly set up similar patients in 
sequence, without having to open each patient’s data. 

You can change the settings for the activity or save a new default at 
any time.

When you open patient data, the activity settings default to the last 
settings you used for that patient.

To save the activity settings as the default:

1

Use the 

arrow

 keys to select 

Activity Setup

 in the navigation 

bar and press 

space bar

.

•

For information about navigating in Core:Tx, see 
“Navigating in Core:Tx” on page 14.

•

The Activity Setup panel displays.

2

Use the 

arrow

 keys to select 

Save as Default

 and press 

space 

bar

.

•

A confirmation window displays asking you to confirm that 
you want to save the current settings as your default 
setting.

3

Press 

space bar

.

•

The system saves your selection and returns to the Activity 
Setup panel.

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands