manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 16

6

Core:Tx User Guide

 

Figure 4: Strap example

Care and Storage 

•

Do not drop or subject the transceiver to strong mechanical 
shock.

•

Do not dismantle or modify the transceiver or base station.

•

Do not immerse the base station or transceiver in water or 
other liquid.

•

Changes or modifications to Core:Tx equipment not expressly 
approved by Performance Health Technologies could void your 
authority to operate this equipment, as granted by the Federal 
Communications Commission (FCC).

To clean:

•

Straps—When necessary, wipe down the back of the strap with 
mild detergent and hang dry. Hand wash entire strap in mild 
detergent if necessary. Do not use solvents to clean the straps.

Hook and loop 
strips

D-ring

Elastic band

Elastic band

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands