manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 43

 

3: Setting Up an Activity

33

To select the Activity Mode:

1

Use the 

arrow

 keys to select 

Activity Setup

 in the navigation 

bar and press 

space bar

.

•

For information about navigating in Core:Tx, see 
“Navigating in Core:Tx” on page 14.

•

The Activity Setup panel displays.

2

Use the 

arrow

 keys to select 

Mode

 and press 

space bar

.

•

The Mode panel displays showing the two modes.

3

Use the 

arrow

 keys to select the mode you want and press 

space bar

.

•

The mode shows it is selected and the 

OK

 button becomes 

active (turns orange).

4

Press 

space bar

.

•

The system saves your selection and returns to the Activity 
Setup panel.

Turning the Audio On or Off 

You can turn the audio on or off depending on your preference and 
environment. When on, the audio provides feedback to the patient 
about the activity status. For example, the sound grows louder as 
the amount of error increases and softer as the amount of error 
decreases. The sound also changes pitch depending on which side 
of the disc the eyepiece is (Monitor Mode) or on which side of the 
target the ball is (Challenge Mode).

To turn audio on or off:

1

Use the 

arrow

 keys to select 

Activity Setup

 in the navigation 

bar and press 

space bar

.

•

For information about navigating in Core:Tx, see 
“Navigating in Core:Tx” on page 14.

•

The Activity Setup panel displays.

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands