Performance Health Core:Tx User Manual Download Page 44

Page: 44 / 188

Core:Tx User Guide

Use the

arrow

keys to select

Audio

and press

space bar

•

The Audio panel displays.

Use the

arrow

keys to select the option you want and press

space bar

•

The option shows it is selected and the

button becomes

active (turns orange).

Press

space bar

•

The system saves your selection and returns to the Activity
Setup panel.

Selecting the Activity Angle

You can select the angle for the activity. You can set the angle to any
setting you need for the exercise the patient will do.

To select the activity angle:

Use the

arrow

keys to select

Activity Setup

in the navigation

bar and press

space bar

•

For information about navigating in Core:Tx, see
“Navigating in Core:Tx” on page 14.

•

The Activity Setup panel displays.

Use the

arrow

keys to select the

Angle

and press

space bar

•

The Activity Angle panel displays, showing a graphic of the
angle and arrow buttons to adjust the angle. The graphic
has a vertical orientation when the angle is set to 0°. The
graphic has a horizontal orientation when the angle is set
to 90°.

Use the

arrow

keys to select the arrow button you want and

press

space bar

until the angle is set.

•

The graphic shows the selected angle and the

button

becomes active (turns orange).

Summary of Contents for Core:Tx





























































































































































































Search results

Summary of Contents for Core:Tx

Reviews:

Brands by name

Popular brands

Performance Health Core:Tx, User Manual

Search results

Summary of Contents for Core:Tx

Reviews:

Brands by name

Popular brands