manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 167

 

 157

Avoiding Knee Hyperextension 
with Weight Shifting

Purpose of Exercise:

 To assist a patient in learning to prevent knee 

hyperextension with weight bearing. 

Preparation/Positioning:

 The patient should be in a standing 

position with the necessary level of manual support and/or parallel 
bars if needed. The patient should understand that the goal of this 
intervention is to prevent excessive knee hyperextension. Apply 
the Core:Tx transceiver to the patient’s knee with a dark gray strap. 
Utilizing audio and visual feedback, encourage the patient to move 
freely into flexion, but not to move past the targeted amount of 
extension.

Set up the activity as shown below. Position the patient in the 
desired position of extension and use the 

Set Position

 button. The 

patient should try to demonstrate a controlled ability to stand and 
weight-shift onto the affected LE without hyperextending beyond 
this point.

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands