manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 3

 

This device complies with part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause 
undesired operation.

Product Warranty Registration:

Please register your Core:Tx with us so that we may continue to 
provide you with the highest quality products, offer technical 
support, and inform you about new software developments and 
updates. Your registration will also activate your warranty so that 
we may be able to provide service to you if necessary.

Register your product by filling out the card included with the 
product or by going online at http://www.performancehealth.com/
coretx/registration.

© 2004 Performance Health Technologies, Inc. all rights reserved.
Core:Tx and MotionTrack are trademarks of Performance Health 
Technologies. 
The publishers acknowledge that the illustrations used in this 
publication are the copyrighted property of VHI Inc.

Performance Health Technologies
6654 Gunpark Drive
Second Floor
Boulder, Colorado 80301
1.800.722.4749

www.performancehealth.com

Model # MT01 
U.S. Patents pending.
Assembled in USA.
Part number 40-C01-1004
Printed in USA.

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands