manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 67

 6: 

Troubleshooting

57

3

In the Core:Tx software, use the 

arrow

 keys to select 

Admin

 in 

the navigation bar and press 

space bar

.

•

For information about navigating in Core:Tx, see 
“Navigating in Core:Tx” on page 14.

•

The Admin. Login panel displays.

4

Enter your password and press 

space bar

.

•

The Admin panel displays.

5

On the transceiver, press and hold the orange button for 5 
seconds or until the light on the transceiver starts blinking 3 
times with a pause and repeating.

6

Release the orange button.

7

Use the 

arrow

 keys to select 

Link-up

 and press 

space bar

.

•

The Link-up panel displays. While the base station and 
transceiver attempt to link up, the signal strength icon will 
be yellow.

•

When the signal strength icon turns green, the link-up 
process is complete.

•

If the signal strength icon turns red, replace the batteries in 
the transceiver, then repeat steps 5 through 7. For more 
information, see “Inserting the Batteries into the 
Transceiver” on page 8.

8

If the signal strength icon remains red, contact technical 
support.

•

For more information, see “Technical Support” on page 18.

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands