manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 10

vi

Core:Tx User Guide

 

Disclaimer Statement

Before operating this equipment, please read the instructions 
contained in this user’s manual completely. Core:Tx™

  is an 

interactive tool that is intended to assist healthcare professionals in 
providing quality rehabilitation services to their patients. Core:Tx 
is intended for use only under the direction and supervision of a 
trained and qualified healthcare professional. Healthcare 
professionals should not use this interactive tool in connection 
with their patients until they are thoroughly familiar with how it 
operates.

The exercises described and illustrated in this manual have been 
provided as a resource to assist healthcare professionals in 
understanding how the Core:Tx product may be applied in the 
clinical setting. These exercises do not constitute advice applicable 
to any particular case, nor are they intended to be (nor should they 
be used as) a substitute for clinical judgment. Treatment decisions 
must be made by the professional in light of all available resources 
and circumstances presented by individual patients. It is the 
responsibility of the healthcare professional to individualize 
exercises to the specific characteristics of each patient and to use 
Core:Tx in a manner that is appropriate and safe for each patient. 
Performance Health Technologies does not guarantee the accuracy 
or appropriateness of any of the exercises contained herein. In no 
way will Performance Health Technologies or any persons 
associated with Performance Health Technologies be responsible 
for any injuries or problems resulting from poor clinical judgment 
or misuse.

All information presented in this user’s manual is intended as a 
resource for trained healthcare professionals only and is not 
intended for use by the general public.

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands