manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 32

22

Core:Tx User Guide

 

Editing Patient Data

You can edit the patient data to change the patient name or add 
notes, as needed.

To edit patient data:

1

Use the 

arrow

 keys to select 

Admin

 in the navigation bar and 

press 

space bar

.

•

For information about navigating in Core:Tx, see 
“Navigating in Core:Tx” on page 14.

•

The Admin. Login panel displays.

2

Enter your password and press 

space bar

.

•

The Admin panel displays.

3

Use the arrow keys to select 

Edit Patient Info

 and press 

space 

bar

.

•

The Edit Patient Info. panel displays.

4

Use the

 Tab

 key until the cursor is in the text box you want to 

edit.

5

Edit the information as needed.

6

Use the

 arrow

 keys to select 

Save Name

 and press 

space bar

.

•

The Save Patient Info? window displays, with the 
information you entered.

7

Click 

OK

 to save the patient data.

•

The system saves the patient’s data and returns to the 
Admin panel.

•

To cancel the edits, click 

Cancel

.

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands