manualshive.com logo in svg

Performance Health Core:Tx, User Manual

Share
Download
Performance Health Core:Tx User Manual Download Page 180

170

Core:Tx User Guide

 

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original purchaser. A 
purchase receipt or other proof of original purchase will be 
required together with the product to obtain service under this 
warranty. This warranty shall not be extended to any other person 
or transferee.

This warranty is void and of no effect if any part of the product is 
altered, replaced, defaced or missing.

This warranty only covers failures due to defects in materials or 
workmanship, which occur during normal use. It does not cover 
damage that occurs in shipment, or failures that are caused by 
repairs, alterations, or parts not supplied by PERFORMANCE 
HEALTH TECHNOLOGIES, or damage that results from accident, 
misuse, abuse, mishandling, or alteration. PERFORMANCE 
HEALTH TECHNOLOGIES will not be responsible for any third-
party software installed by the user, nor for user data from the use 
of such software, during the period of this warranty.

PERFORMANCE HEALTH TECHNOLOGIES AND ITS 
REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE 
LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL 
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE 
OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY 
IS MADE IN LIEU OF ALL OTHER WARRANTIES INCLUDING 
THE WARRANTY OF MERCHANT ABILITY, AND FITNESS FOR 
A PARTICULAR PURPOSE, THAT ARE HEREBY DISCLAIMED BY 
PERFORMANCE HEALTH TECHNOLOGIES AND ITS 
REPRESENTATIVES. 

ATTENTION:

PERFORMANCE HEALTH TECHNOLOGIES RESERVES THE 
RIGHT TO MODIFY ANY PART OF THIS PRODUCT WITHOUT 
PRIOR NOTICE.

Summary of Contents for Core:Tx





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands