201
5-0
3
78
Pulscon LTC57 PROFIBUS PA
Diagnostics and troubleshooting
11.4
Diagnostic list
In the
Diagnostic list
submenu, up to 5 currently pending diagnostic messages can be
displayed. If more than 5 messages are pending, the messages with the highest priority are
shown on the display.
Navigation:
Diagnostics
Diagnostic list
Calling up and closing the remedial measures
1. Press .
The message for the remedial measures for the selected diagnostic event opens.
2. Press
and
simultaneously.
The message about the remedial measures closes.
11.5
List of diagnostic events
E
Diagnostic
number
Short text
Repairing action
Status signal
(from the
factory)
Diagnostic
behavior
(from the
factory)
Diagnostic of sensor
003
Broken probe detected
1. Check map
2. Check sensor
F
Alarm
046
Build-up detected
Clean sensor
F
Alarm
104
HF cable
1. Dry HF cable connection and
check sealing
2. Change HF cable
F
Alarm
105
HF cable
1. Tighten HF cable connection
2. Check sensor
3. Change HF cable
F
Alarm
106
Sensor
1. Check sensor
2. Check HF cable
3. Contact service
F
Alarm
Diagnostic of electronic
242
Software incompatible
1. Check software
2. Flash or change main electronics
module
F
Alarm
252
Modules incompatible
1. Check electronic modules
2. Change I/O or main electronic
module
F
Alarm
261
Electronic modules
1. Restart device
2. Check electronic modules
3. Change I/O module or main elec-
tronics
F
Alarm