Pepperl+Fuchs Pulscon LTC57, Manual, Page: 106 / 176

201
5-0
3
106
Pulscon LTC57 PROFIBUS PA
Operating menu
Present mapping
Mapping end point
Record map
Navigation Setup  Present mapping
Description Indicates up to which distance a mapping has already been recorded.
Blocking
Navigation
Setup

Map. end point
Prerequisite Confirm distance (page 105) = Manual map or Distance too small
Description Specify new end of the mapping.
User entry 0 to 200000.0 m
Factory setting 0.1 m
Additional information This parameter defines up to which distance the new mapping is to be recorded.
The distance is measured from the reference point, i. e. from the lower edge of the
mounting flange or the threaded connection.
Note: For reference purposes the Present mapping parameter (page 106) is
displayed together with this parameter. It states up to which distance a mapping has
already been recorded.
Blocking
Navigation
Setup

Record map
Prerequisite Confirm distance (page 105) = Manual map or Distance too small
Description Start recording of the map.
Selection • No
• Record map
• Delete map
Factory setting No
Additional information Meaning of the options
• No
The map is not recorded.
• Record map
The map is recorded. After the recording is completed, the new measured
distance and the new mapping range appear on the display. When operating
via the local display, these values must be confirmed by pressing .
• Delete map
The mapping (if one exists) is deleted and the device displays the recalculated
measured distance and the mapping range. When operating via the local
display, these values must be confirmed by pressing .