201
5-0
3
108
Pulscon LTC57 PROFIBUS PA
Operating menu
15.3.2
Analog input 1 to 6 submenu
Analog input 1 to 6
Channel
PV filter time
Note:
There is an
Analog input
submenu for each AI block of the device. The
AI block is used to configure the measured value transmission to the bus. Only the
most basic properties of the AI blocks can be configured in this submenu. For a
detailed configuration of the AI blocks refer to
Expert
Analog inputs
Analog input 1 to 6.
Navigation
Expert
Analog inputs
Analog input 1 to 6
Blocking
Navigation
Expert
Analog inputs
Analog input 1 to 6
Channel
Description
Standard parameter
CHANNEL
of the Analog Input Block according to the
PROFIBUS profile.
Selection
• Level linearized
• Distance
• Terminal voltage
• Electronic temperature
• Measured capacitance
a
• Absolute echo amplitude
• Relative echo amplitude
• Absolute EOP amplitude
• Noise of signal
• EOP shift
• Calculated DC value
b
• Sensor debug
• Analog output adv. diagnostics 1
• Analog output adv. diagnostics 2
a
Visibility depends on order options or device settings
b
Visibility depends on order options or device settings
Factory setting
Level linearized
Additional information
Allocates a measured value to the AI block.
Blocking
Navigation
Expert
Analog inputs
Analog input 1 to 6
PV filter time
Description
Standard parameter
PV_FTIME
of the Analog Input Block according to the
PROFIBUS profile
User entry
Positive floating-point number
Factory setting
0
Additional information
This parameter defines the damping constant
(in seconds) for the output of the
Analog Input Block.