201
5-0
3
40
Pulscon LTC57 PROFIBUS PA
Mounting
6.2.5
Turning the transmitter housing
To provide easier access to the connection compartment or display module, the transmitter
housing can be turned:
Figure 6.23
Turning the transmitter housing
1. Unscrew the securing screw using an open-ended wrench.
2. Rotate the housing in the desired direction.
3. Tighten the securing screw (1.5 Nm for plastics housing; 2.5 Nm for aluminium or stainless
steel housing).
6.2.6
Turning the display module
Figure 6.24
Turning the display module
1. If present: Loosen the screw of the securing clamp of the electronics compartment cover
using an Allen key and turn the clamp 90
°
counterclockwise.
2. Unscrew cover of the electronics compartment from the transmitter housing.
3. Pull out the display module with a gentle rotation movement.
4. Rotate the display module into the desired position: Max. 8 x 45
°
in each direction.
5. Feed the spiral cable into the gap between the housing and main electronics module and
plug the display module into the electronics compartment until it engages.
6. Screw the cover of the electronics compartment firmly back onto the transmitter housing.
7. Tighten the securing clamp again using the Allen key (torque: 2.5 Nm).
max.350°
8 mm
8 mm
1.
2.
3.
+
E
–
1
3 mm
1.
4.
3.
2.