Pentax Silkypix K-500, Operating Manual

Page: 285 / 313

283
Ap
pen
di
x
10
This image is protected
You are trying to delete an image that is
protected. Remove the protection from the
image. (p.229)
Not enough battery power
remaining to activate Pixel
Mapping
Appears during Pixel Mapping if the battery level
is insufficient. Install a fully charged battery or
use the optional AC adapter kit.
Not enough battery power
remaining to clean sensor
Appears during sensor cleaning if the battery
level is insufficient. Install a fully charged battery
or use the optional AC adapter kit.
Not enough battery power
remaining to update the
firmware
Appears when trying to update the firmware if the
battery level is insufficient. Install a fully charged
battery or use the optional AC adapter kit.
Unable to update firmware.
There is a problem with the
firmware update file
Unable to update the firmware. The update file is
damaged. Try downloading the update file again.
Image folder cannot be
created
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved. Insert a new SD Memory
Card or format the card. (p.228)
Unable to store image
The image could not be saved because of an SD
Memory Card error.
Settings not stored
The DPOF settings could not be saved because
the SD Memory Card is full. Delete unwanted
images and perform the DPOF setting again.
(p.193)
The operation could not be
completed correctly
The camera was unable to measure the manual
white balance (p.152) or use HDR Capture
(p.156). Try the operation again.
No more images can be
selected
You cannot select more than the maximum
number of images for Select & Delete (p.193),
Index (p.203), and Eye-Fi Image Transfer
(p.237).
Image not found
There are no images that can be transferred in
the selected folder. (p.237)
No image can be processed
There are no images that can be processed
using the Digital Filter (p.198) or RAW
Development (p.205) function.
Error Messages Description
K-500.book Page 283 Friday, June 14, 2013 2:29 PM