Pentax Silkypix K-500, Operating Manual

Page: 161 / 313

159
Sh
oo
ting
Setting
s
5
1
Press the
M
button in standby mode.
The control panel appears.
2
Use the four-way controller (
2345
) to select [Distortion
Correction] or [Lat-Chromatic-Ab Adj], and press the
4
button.
The [Distortion Correction] or [Lat-Chromatic-Ab Adj] screen appears.
3
Use the four-way controller (
45
)
to select [Off] or [On].
4
Press the
4
button.
The camera returns to the control panel.
•
Corrections can only be made when using DA, DA L, D FA or some FA
lenses. The Lens Correction functions cannot be selected when an
incompatible lens is attached. (p.272)
•
The Lens Correction functions are disabled when using an accessory such
as a close-up ring or rear converter that is attached between the camera
and the lens.
•
The shooting speed for Continuous Shooting may be slower when using
the Distortion Correction function.
•
The effects of the Lens Correction functions may be barely noticeable in
some cases due to the shooting conditions or other factors.
•
When a compatible lens is attached and the file format is set to [RAW]
or [RAW+], the correction information is saved as a RAW file parameter
and you can select [On] or [Off] when developing the RAW images. (p.206)
•
You can also set [Distortion Correction] and [Lat-Chromatic-Ab Adj]
in [Lens Correction] of the [
A
Rec. Mode 2] menu.
Distortion Correction Distortion Correction
On
On
OK OK
OK
Cancel Cancel
MENU
K-500.book Page 159 Friday, June 14, 2013 2:29 PM