Pentax Silkypix K-500, Operating Manual

Page: 126 / 313

124
Sh
oo
ting
Fu
nctio
ns
4
The shutter can be released from a distance by using an optional remote
control unit.
1
Mount the camera onto a tripod.
2
Press the four-way controller (
5
) in standby mode.
The Drive Mode setting screen appears.
3
Use the four-way controller (
45
) to select
h
.
4
Press the four-way controller (
3
),
use the four-way controller (
45
)
to select
h
or
i
, and press the
4
button.
The remote control receiver on the front
of the camera will blink and the camera
is in a standby status.
5
Press the shutter release button halfway.
The autofocus system operates.
Shooting with a Remote Control Unit (Optional)
h Remote Control The shutter is released immediately after the shutter
release button on the remote control unit is pressed.
i
Remote Control
(3 sec. delay)
The shutter is released about 3 seconds after the shutter
release button on the remote control unit is pressed.
Shooting with a remote control unit is not available in the following situations.
• when
\
(Moving Object)/
Z
(Pet)/
R
(Kids) of
H
mode is set
• when Interval Shooting is set
Cancel Cancel
MENU
Remote Control Remote Control
OK OK
OK
K-500.book Page 124 Friday, June 14, 2013 2:29 PM