Pentax Silkypix K-500, Operating Manual

Page: 239 / 313

237
C
ha
ng
in
g
A
dd
itio
na
l Sett
in
gs
7
When [SELECT] is set in Step 3 on p.236, only the selected images are
transferred.
1
Press the four-way controller (
3
) in the single image display
of playback mode.
The playback mode palette appears.
2
Use the four-way controller (
2345
) to select
N
(Eye-Fi
Image Transfer), and press the
4
button.
The screen to select the unit of transfer appears.
3
Use the four-way controller (
23
) to select the unit of transfer,
and press the
4
button.
The folder selection screen appears.
•
When an Eye-Fi card is used, a new folder is created for every 100 images
saved.
•
Auto Power Off does not function when images are being transferred.
•
When transferring a large number of images, use the optional AC adapter kit
or install a fully charged battery. If the internal temperature of the camera
becomes high during transferring images, the camera may be turned off
automatically to protect the camera circuitry. In such a case, turn on the
camera again after a while, and data transfer will resume.
•
Select [Communication Info] in Step 2 on p.236 to check the firmware version
of the Eye-Fi card.
Transferring Selected Images
Select image(s)
Enables selecting individual images (in one folder,
up to 100 images).
• For images taken with [File Format] set to [RAW+],
JPEG and RAW files saved are counted as one image,
and both files are transferred.
Select a folder
Transfers all of the images stored in the selected folder.
• Up to 100 images that can be transferred from
the selected folder are transferred.
K-500.book Page 237 Friday, June 14, 2013 2:29 PM