Pentax Silkypix K-500, Operating Manual

Page: 261 / 313

259
Usi
ng
th
e F
las
h
9
1
Set the wireless mode of the external flash directly connected
to the camera to [MASTER] or [CONTROL].
2
On the wireless remote flash unit, set the wireless flash mode
to [SLAVE] and set the channel to the same channel as the
flash directly connected to the camera. Then, place it at the
desired location.
3
Confirm that both flashes are fully charged, and then take
a picture.
Wireless Shooting Using a Combination of External Flash Units
MASTER
Discharge both the flash directly connected to the
camera and the wireless flash unit as the main flash.
CONTROL
Discharges the flash directly connected to the camera
as a control flash only, not as the main flash.
•
The Shake Reduction function is not available.
•
When using multiple AF540FGZ/AF360FGZ external flashes and shooting
with the high-speed sync flash in wireless mode, set the flash directly
connected to the camera to high-speed sync flash mode.
K-500.book Page 259 Friday, June 14, 2013 2:29 PM