Pentax Silkypix K-500, Operating Manual

Page: 141 / 313

139
Sh
oo
ting
Fu
nctio
ns
4
5
Use the four-way controller (
45
) to select hours, minutes, or
seconds, and use the four-way controller (
23
) to set the time.
Press the
4
button to complete the setting.
6
Use the four-way controller (
23
) to select [Start Interval],
and press the four-way controller (
5
).
7
Use the four-way controller (
23
) to select [Now] or [Set
Time], and press the
4
button.
If you selected [Now], proceed to Step 10.
8
Use the four-way controller (
23
) to select [Start Time],
and press the four-way controller (
5
).
9
Use the four-way controller (
45
) to select hours or minutes,
and use the four-way controller (
23
) to set the time.
Press the
4
button to complete the setting.
10
Use the four-way controller (
23
) to select [Start shooting],
and press the
4
button.
The camera is ready to record a movie.
11
Press the shutter release button halfway.
The autofocus system operates.
12
Press the shutter release button fully.
When [Start Interval] is set to [Now], a picture is taken immediately,
Instant Review is displayed, and then the monitor turns off.
After the set number of pictures are taken, [Interval Shooting complete]
is displayed, and the camera returns to normal standby mode.
When recording with Interval Movie, use the optional AC adapter kit or install
a fully charged battery. If the battery becomes depleted during Interval Movie
recording, recording may stop.
K-500.book Page 139 Friday, June 14, 2013 2:29 PM