Setting up adaptive defrost parameters
To enter the adaptive defrost menu, navigate to the high-level
DEFROST SETUP
screen and press
SET
, then navigate to the screens in Table 17.
See
Adaptive defrost setup parameters
for more information.
Note:
To enable the
ADAPTIVE DEFROST
setup start screen, navigate to the system setup menu
flow. Set
SN3: MEASUREMENT
to defrost and set the
DEFROST TERM TYPE
to
TE-MP
.
Figure 17: Adaptive defrost setup screens navigation map
39
MR5 Series Panel Mount Case Controller Technical Bulletin
Discontinued
