Setting up the system setup parameters
To set the system setup parameters, navigate to the high-level
SYSTEM SETUP
screen and press
SET
, then navigate to the screens in Table 13.
Figure 13: System setup navigation map
Table 13: System setup screen descriptions, values, and selections
Screen name
Description
Value or
selection
To change the system name, press
SET
.
n/a
SYSTEM NAME
Select the preferred characters and numbers from the
available options, and press
SET
.
• A to Z
• 0 to 9
• Space
To set the units of temperature measurement, press
SET
.
n/a
UNITS
Select
F
(Fahrenheit) or
C
(Celsius), and press
SET
.
•
F
•
C
To set the display brightness level, press
SET
.
n/a
DISPLAY
BRIGHTNESS
Select the brightness value from the range 1 to 5 and press
SET
.
1 to 5
To update the firmware, press
SET
.
SET
FIRMWARE
UPDATE
To go to the
INSERT USB DRIVE
screen for a firmware
update, select
YES
.
•
YES
•
NO
INSERT USB
DRIVE
To update the controller’s firmware, insert a USB drive into
the controller’s USB port within 15 seconds. The firmware
updates automatically.
n/a
MR5 Series Panel Mount Case Controller Technical Bulletin
32
Discontinued
