Page 80 of 163
available so you don’t need to mix them up.
4.1.4
Storing a palette
This is how you save a palette value:
1> Press Clear to clear the programmer.
2> Select the fixtures for which you want to store palette values.
Select one fixture only to record a shared palette entry.
3> Using the attribute buttons and wheels, set the attributes you
want in the palette entry. You can store any or all attributes of a
fixture in each palette entry. Only attributes you have changed
will be recorded.
4> Press the attribute button for the attributes you want to store (the
dimmer button will store all attributes). The buttons light up to
show you which attributes are going to be recorded. It’s best to
save only one type of attribute (e.g. Tilt/Pan)
5> Press Store Palette, then type the palette number to be saved and
press Enter. You can also press one of the Flash buttons under the
1-30 preset faders to store the palette entry under that button
•
It’s easiest to recall palettes from the LCD menu. If you are saving
palettes to be recalled from the menu system, the palette
numbering is as follows:
Page
name
1
st
Screen 2
nd
screen 3
rd
screen 4
th
Screen
Colour 1-5
6-10
101-105 106-110
Gobos 11-15 16-20 111-115 116-120
Positions 21-25
26-30
121-125 126-130
Page 4
31-35
36-40
131-135
136-140
Page 5
41-45
46-50
141-145
146-150
Page 6
51-55
56-60
151-155
156-160
Page 7
61-65
66-70
161-165
166-170
Page 8
71-75
76-80
171-175
176-180
Page 9
81-85
86-90
181-185
186-190
Page 10
91-95
96-100
191-195
196-200
•
If you normally use the grey Flash buttons to recall palettes, then
you would use numbers 1-30. You can also change the fixture
page to access Palettes 31-60 (on page 1--), 61-90 (on page 2--)
and 91-120 (on page 3--). You need to enable User settings 5
(Palette Pages) to make the extra pages work, otherwise Palettes
1-30 are used on all four fixture pages.
4.2
Playback
4.2.1
Recalling a palette value
To recall a palette value, this is what you do:
1> Select the fixtures to be changed. Shared palettes can be set to
any fixture of the same type. Individual palettes will set individual
values to each fixture.
2> Select the attributes you want to recall from the palette. The
