PCE Instruments PCE-USC 20 Operating Manual Download

Page: 62 / 66

instrument works normally

(5) If instrument works normally, install the battery cover, screw down fast fixed

nuts, then Renewal battery is finished.

9.4 Trouble Elimination

If instrument appears the following irregular working condition:

(1) instrument can not turn on/off automatically;

(2) cannot test;

(3) keystrokes don’t work;

(4) measured value inconstant.

Please do not dismantle instrument and repair by yourself. After filling out the

maintenance and repair card, post it with equipment to our company maintenance

department. It is highly appreciated if you send the equipment along with a brief

description about the trouble situation.

9.5 Safety Tips

This instrument design conforms to related security standards, its application must

satisfy external environment condition, it is also required for operators to have

corresponding technical background to guarantee safe operation. Before

application, please read following safety tips.

Note: this instrument is a nondestructive inspection instrument applying to

materials inspection, forbidden to use as medical instrument. It is
only limited to laboratory and industry environment application.

9.5.1 System Power

This instrument can supply power through external power supply adapter or

lithium ion battery. For power supply adapter or battery, please choose

recommended products by us. For battery charge and renew please follow

reference operating steps.

9.5.2 System Software

Any software could not avoid mistakes, but we try our best to decrease probability

of it to minimum. This instrument software has received comprehensive and strict

test.

Summary of Contents for PCE-USC 20



































































Search results

Summary of Contents for PCE-USC 20

Reviews:

Related manuals for PCE-USC 20

Brands by name

Popular brands

PCE Instruments PCE-USC 20, Operating Manual

Search results

Summary of Contents for PCE-USC 20

Reviews:

Related manuals for PCE-USC 20

Brands by name

Popular brands